Afghan Commandos Game
The Afghan Commandos Game: A Glimpse into Afghanistan’s Turbulent History The Afghan Commandos Game stands as a testament to the power of storytelling through digital media. Developed by Afghan computer professionals Masood Asir and Ali Asir, this groundbreaking project aimed to bring to life the harrowing experiences of the Afghan National Army and the complexities of war in Afghanistan.
Read more →
Radio Controller & Receiver
SKY Radio Controller & Receiver High Speed & Long Range transmitter In this project we are making radio controller & receiver and make it work just as a commercial controller. So, this project will have many parts, a transmitter and a receiver with outputs for each channel. I haven’t tested the range of this one, but with my past projects, which is more than the same, I had good signal up to 1000 meters.
Read more →.jpg)
2kWh lithium ion battery (12v)
Building a DIY 2kWh Lithium-Ion Battery Pack for 12V DC Applications
Read more →
Clark Zapper Parasite Killer
A pulse device is often used in alternative medicine. Its primary goal is to boost the users immune system. It kills likely bacteria, viruses, fungi, toxins, etc. by applying very small currents through the body with a specific pulse and frequency.
Read more →
DIY SOLAR CHARGE CONTROLLER
It’s an automatic switching circuit that used to control the charging of a battery from solar panels or any other source. It’s a 555 based simple circuits the charge the battery when the battery charge goes below the lower limits, and stop charging when the battery reaches it's upper limit voltage
Read more →
Battery Status Indicator Zener
The simple 12V battery status indicator is a circuit that shows the battery state only by flashing LEDs. For example, if out of 10 six LEDs are glowing it means 60 percent of the battery power is left. When the battery is fully charged the circuit LEDs will turn on, and the LEDs will turn off one by one as the battery runs down.
Read more →
Motor Speed Controller 555 IC
Pulse Width Modulation (PWM) is a simple yet effective method used to control the speed of motors in many applications. It operates by varying the "on" and "off" periods of electrical signals, thus controlling the average power supplied to the motor. This article will guide you through creating your very own DIY motor speed controller using PWM and a 555 timer. This circuit can be used to control the speed of practically any motor.
Read more →
DIY Peltier Air Cooler
In the sweltering heat of summer, an air cooler can be a lifesaver. However, commercial air coolers can be expensive and may not always fit within your budget. This is where a do-it-yourself (DIY) air cooler comes in handy. Not only is it cost-effective, but it also provides an opportunity to learn and apply some basic principles of thermodynamics. This article will guide you through the process of making your own air cooler using simple materials like a foam board, water pump, sponges, a fan, and a heatsink.
Read more →
Mechanical Electronic MPPT
In this project, we used a DC/DC buck converter with feedback pot control, allowing us to adjust the output voltage and current by turning the knob. We then used an op amp circuit with a gear motor to adjust the feedback in response to changes in the solar input.
Read more →
PWM DC motor speed controller
PWM (Pulse Width Modulation) DC motor speed controller circuit board is a device used to control the speed of a DC motor by changing the pulse width of the voltage provided to it. This circuit board is an essential tool for various applications, including robotics, automation, and automotive industries.
Read more →
Motor Direction &Speed Control
Whether you're building a robot, an electric vehicle, or an automatic window blind system, controlling the direction and speed of an electric motor is a fundamental task. This blog post will take you on a detailed exploration of electric motor direction and speed controllers, shining a light on the principles behind these essential devices and helping you to better understand their applications and functionalities.
Read more →
DC Motor PWM H-Bridge Circuit
The Direct Current (DC) motor Pulse Width Modulation (PWM) H-Bridge circuit board is a fundamental component in the field of robotics and automation. PWM provides a method for controlling the power delivered to an electrical device by manipulating the duration of its 'on' and 'off' states. The H-Bridge circuit, on the other hand, allows for the direction of the current (and hence the motor direction) to be changed. The integration of these two technologies on a single circuit board enables efficient control of a DC motor's speed and direction.
Read more →
DIY DC To DC Boost Converter
A boost converter (step-up converter) is a DC-to-DC power converter that steps up voltage (while stepping down current) from its input (supply). In this project I will show you an efficient and common way how to step up DC voltages. I will also demonstrate how easy it can be to build a boost converter with the help of an ATtiny85. Let's get started!
Read more →
DIY Fiber Glassing
Fiberglass is a versatile and lightweight material used in various applications, including automotive, marine, and construction projects. Its high strength-to-weight ratio, resistance to corrosion, and affordability make it an ideal choice for many do-it-yourself (DIY) enthusiasts. This comprehensive guide will cover the essential aspects of DIY fiberglassing, from understanding the materials to the step-by-step process of creating your own fiberglass project.
Read more →
Making a DIY Bullet
With that said, creating a DIY bullet can be a fascinating project for those interested in firearms and ammunition. The process involves creating three main components; the casing, gun powder, primer wire fuse, and projectile.
Read more →
DIY Electric Detonator Fuse
The DIY electric detonator fuse project by Engineer Ali is a device that can be used when working with fireworks or explosives. The project is designed to ignite fuses remotely and safely using electrical signals. An electric detonator is an essential tool used in industrial and military settings for initiating explosives and fireworks. My Sky Power
Read more →
DIY Hot Air Balloon Plastic
The DIY hot air balloon project by Engineer Ali is a remarkable example of how ingenuity and creativity can create functional and accessible devices. The balloon is made from a simple combination of materials, including tissue paper, glue, and torch gas or hot air, making it a cost-effective and environmentally friendly option.
Read more →
Mini DVD CNC DIY
In the world of engineering and electronics, there is a constant search for new ways to innovate, improve, and create functional and accessible devices. One remarkable example of this is Engineer Ali's Mini CNC plotter project, which utilizes DVD parts to create a highly functional and affordable mini CNC plotter capable of drawing and cutting various shapes.
Read more →
DIY mini FM transmitter PCB
Engineer Ali has created a DIY mini FM transmitter circuit board that can transmit audio signals up to a range of 100 meters using FM frequency. The circuit board is a small but powerful device that allows users to broadcast their own audio signals wirelessly, making it an excellent option for individuals who desire a cost-effective and simple solution for transmitting their audio signals.
Read more →
DIY Square Wave Inverter PCB
The square wave inverter is a type of inverter that converts solar DC power to AC power. It uses a multivibrator to generate square wave pulses in the output at a fixed frequency, which transforms the DC voltage or signal from the battery to AC voltage.
Read more →
DIY (UPS) ACP17STICC
ACP17STICC: Engineer Ali's Ultimate DIY Uninterruptible Power Supply (UPS) - My Sky Power Build
Read more →
DIY RC Helicopter
Making a DIY foam radio-controlled helicopter can be a fun and rewarding project. This project can provide an opportunity to learn about the fundamental principles of helicopters and the principles of remote control systems. Building a homemade helicopter can also be a great way to develop skills such as problem-solving, mechanical design, and creativity.
Read more →
MSP Mini Router UPS
The MSP Mini Router UPS, designed and built by My Sky Power, is a small, lightweight and portable battery backup uninterruptible power supply that ensures continuous power supply to your Wi-Fi router, modem or security camera during an electrical outage. The MSP Mini Router UPS comes with a built-in 15000mAH battery, making it an ideal solution for homes, businesses and remote locations where power cuts are frequent.
Read more →
Quadcopter Racing Drone
My Sky Power Team build the First Person View, or FPV, racing drone called MSP-QD4-22C where it is equipped with cameras while wearing head-mounted displays showing the live stream camera feed.
Read more →
Professional Bowling Kit
Grab the best bowling template available and make your custom bowling games.
Read more →
Yummy Truck Locator
Yummy Truck Locator, an app where you can hungry people can find delicious food trucks! With the stunning and easy to use user interface, it allows you to manage all of your trucks in real-time. Uniquely built to be lightweight and graphical with exceptional performance.
Read more →
My Sky Power Powerbank
The MSP Powerbank, designed and built by My Sky Power, is a powerful and reliable power backup solution that provides high-capacity charging for all your devices. With a capacity of 30000mAH and a 5V 3A output, the MSP Powerbank is built to meet the needs of customers who require extended periods of backup power for their devices.
Read more →